Product characteristics
Nanometer magnesium oxide is prepared by aerosol salt ablation method. It has high purity, small particle size, uniform distribution, large surface area, clean surface, no residual impurities, low loose density, and easy to disperse. There are obvious small size effects, surface effects, quantum size effects, and macroscopic tunneling effects. After surface modification, there is no hard agglomeration phenomenon, and there is better dispersion and higher Nano activity in the system. In order to maximize the special properties of light, electricity, magnetic field, heat, and quantum effects of nanometer magnesium oxide particles, the performance of traditional products has been greatly improved, and a qualitative leap has taken place, giving new properties to the products.
Product parameters
Products Nanometer Magnesium Oxide(MgO)
Product Model ZH-MgO-01
Average particle size 15 nm
Product purity 99.9 %
Specific surface area 92.61 M2 / g
Theoretical density 3.580 g/cm3
Loose density 0.04 g/cm3
Melting point 1900 ℃
Boiling point 2400 ℃
Crystalline near spherical
Outer white fluffy powder
Distributed gas phase method, easy to disperse liquid and polymer materials
Product application
Nano-magnesium oxide is used in high-performance ceramics: Nano-magnesium oxide has good sintering properties, and low-temperature sintering can be achieved without the use of sintering Auxiliaries, and high-density fine crystal ceramics or polyfunctional magnesium oxide thin films can be produced. It is expected to be developed into sophisticated materials under severe conditions such as high temperature and high corrosion;
Nano-magnesium oxide is used in absorbing materials: Due to its high activity and high dispersion, nanometer magnesium oxide is easily combined with polymers or other materials. This kind of composite material has good microwave absorption performance, but at the same time, it does not reduce the strength and toughness of the raw materials, and the addition of fibrous magn |
Home
